Test and Measurement Forum

Long readings

Which product is right for your exact requirements

Long readings

Postby Acidshock » Fri Apr 21, 2006 11:19 pm

High I was wondering if any product you guys make could reading in a signal that was about 13 seconds long. Curently I have a 3206 but the max I get is about 5 seconds of buffer.
Acidshock
 

Postby ricardo » Mon Apr 24, 2006 9:44 am

Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator
User avatar
ricardo
Guru
Guru
 
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Postby Acidshock » Mon Apr 24, 2006 8:01 pm

ricardo wrote:Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric


Unfortunately we need the resolution, we basically need a 2MS buffer.
Acidshock
 

Postby Guest » Mon Apr 24, 2006 8:03 pm

Acidshock wrote:
ricardo wrote:Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric


Unfortunately we need the resolution, we basically need a 2MS buffer.


Too bad you guys dont have a Ram FIFO controller so that the data could be sucked out of the buffer as fast as its being put in.
Guest
 

Postby ricardo » Tue Apr 25, 2006 7:24 pm

Hi Acidshock,

I'm sorry we can't help you in this instance the scope with the largest buffer we have to offer is the 3206 with 1 MS.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator
User avatar
ricardo
Guru
Guru
 
Posts: 71
Joined: Wed May 07, 2003 9:43 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests