ADC 212/3

Which product is right for your exact requirements
Post Reply
Souriau

ADC 212/3

Post by Souriau » Mon Jul 18, 2005 9:03 pm

Hi
Can anyone tell me what is the minimum PC specification needed for the automovite ADC 212/3?

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

212/3 Req

Post by Autonerdz » Tue Jul 19, 2005 2:27 pm

Anything Pentium class that runs Windows 98SE or higher will work fine. Look for one with a parallel port. That's the long 25 pin printer port. This is the standard interface for the 212/3. You can go USB with them but have to purchase the optional adapter. The USB adapter has no performance advantages.

If you are in the US, feel free to contact me with any questions you may have. I've got the 212/3 kits here.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Post Reply