not logic reading of sensors

Post Reply
wayn2010
Newbie
Posts: 0
Joined: Wed Dec 10, 2014 9:00 pm

not logic reading of sensors

Post by wayn2010 » Wed Dec 10, 2014 9:24 pm

I have a pico system with 3 sensors ! suddenly all sensors gave a not logic reading for example -300 C, 260 C ... etc this situation occurred for two weeks and after that the problem solved automatically and the sensors return to Normal situation so how I can solve the problem ? and find the accurate readingsfor those two weeks ?

Martyn
Site Admin
Site Admin
Posts: 3225
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: not logic reading of sensors

Post by Martyn » Wed Dec 10, 2014 10:04 pm

Can you give some more details of the setup ? The device, the sensors, the system being monitored and the PC doing the monitoring.

It is unlikely that we will be able to recover the true readings, but we may be able to prevent it happening again.
Martyn
Technical Support Manager

wayn2010
Newbie
Posts: 0
Joined: Wed Dec 10, 2014 9:00 pm

Re: not logic reading of sensors

Post by wayn2010 » Sat Dec 13, 2014 10:07 am

thanks for your replay !
I will give you all information that you need tomorrow but what is the reason for this problem ?!

Martyn
Site Admin
Site Admin
Posts: 3225
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: not logic reading of sensors

Post by Martyn » Sun Dec 14, 2014 8:30 am

It could be noise pickup, grounding issues, power supply problems, or a property of what is being measured. Until I know the answers to the previous questions I can't say exactly what this would be.
Martyn
Technical Support Manager

wayn2010
Newbie
Posts: 0
Joined: Wed Dec 10, 2014 9:00 pm

Re: not logic reading of sensors

Post by wayn2010 » Tue Dec 16, 2014 5:43 pm

okay sir !

we have pico EL005
AP 242/030*

Martyn
Site Admin
Site Admin
Posts: 3225
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: not logic reading of sensors

Post by Martyn » Mon Dec 22, 2014 10:53 am

This is part of the EnviroMon product range, therefore I have moved the topic to the appropriate section.
Martyn
Technical Support Manager

alphatemp_ziko
Newbie
Posts: 0
Joined: Mon Dec 02, 2013 2:19 pm

Re: not logic reading of sensors

Post by alphatemp_ziko » Mon Dec 22, 2014 12:30 pm

Hi, I assume you are using an EL041 thermocouple converter. I have a few questions:

1) What kind of temperature sensors are you using?
2) How are you physically connecting the temperature sensors?
3) How many temperature sensors do you have?
4) What are you actually measuring?

Best regards

Post Reply