Test and Measurement Forum

How to create MSO group

Forum for discussing PicoScope version 6 (non-automotive version)

How to create MSO group

Postby NikB » Tue Jun 24, 2014 3:51 pm

When I create a digital channel/group no signals appear to be included, as the value stays at zero, but if I add the individual channels to the display, I can see them changing. I tried selecting channels from the upper window and from the lower (Display) window with same result. Any suggestions what I'm missing?
NikB
Newbie
 
Posts: 0
Joined: Tue Jun 24, 2014 2:30 pm

Re: How to create MSO group

Postby Martyn » Tue Jun 24, 2014 7:43 pm

Try dragging and dropping the digital channels onto the group name, you should then get a little plus sign to the left of the group name.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: How to create MSO group

Postby NikB » Wed Jun 25, 2014 1:01 pm

Martyn wrote:Try dragging and dropping the digital channels onto the group name, you should then get a little plus sign to the left of the group name.

That worked, thanks!
NikB
Newbie
 
Posts: 0
Joined: Tue Jun 24, 2014 2:30 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest