Test and Measurement Forum

how to store 10000 waveforms in buffer

Post any questions you may have about our current range of oscilloscopes

how to store 10000 waveforms in buffer

Postby Tatattu » Wed Jun 04, 2014 1:59 pm

Hey there again,
you can read in the manual that
PicoScope oscilloscope software has the ability to store up to 10000 waveforms in its waveform buffer
. But in my case there where only 2683 waveforms stored in the buffer. Can I extend that number up to 10000? My time division is 10 micro sec with a 2 GS/s sampling.
Thank you so much for your help in advance!
Posts: 0
Joined: Tue Jun 03, 2014 11:37 am

Re: how to store 10000 waveforms in buffer

Postby Martyn » Mon Jun 09, 2014 1:55 pm

10000 is the theoretical limit, the actual number of waveforms you can collect will depend upon the number of samples per waveform and the memory depth of the scope.
Technical Support Manager
Site Admin
Site Admin
Posts: 3217
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest