Test and Measurement Forum


Post any questions you may have about our current range of oscilloscopes


Postby kayrod » Tue May 07, 2013 3:51 am

My 3224 has developed a difference between channel A and Channel B, with all settings the same. Even with no probes connected. Channel A is picking up all sorts of noise inc 50Hz. Channel B has a clean flat signal until a signal is applied. The noise on Channel A appears on any applied signal.
I believe this 3224 has become faulty. Where can I send it for repair, re-calibration. :?
Posts: 0
Joined: Mon May 06, 2013 3:52 am

Re: 3224

Postby Martyn » Tue May 07, 2013 12:13 pm

Please contact support@picotech.com they will advise what needs to be done
Technical Support Manager
Site Admin
Site Admin
Posts: 3114
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests