I newly bought a PICO 3206A and trying to modify the driver to continuously capture the data with high frequency.
At the well beginning, I tried to run the DEMO, which was included in the PS3000asdk_r10_4_3_5 package. I exactly followed
the instructions in the PS3000Acon.c, just as:
To build this application:
* Set up a project for a 32-bit console mode application
* Add this file to the project
* Add PS3000A.lib to the project
* Add ps3000aApi.h and picoStatus.h to the project
* Build the project
However, lots of function definitions are lost, such as:
PS3000A_PWQ_CONDITIONS_V2: undefined
PS3000A_MAX_LOGIC_LEVEL: undefined
PS3000A_DIGITAL_PORT0: undefined
PS3000A_DIGITAL_PORT1: undefined
PS3000A_DIGITAL_PORT: undefined
ps3000aSetDigitalPort: undefined
PS3000A_MAX_DIGITAL_PORTS: undefined...
I checked the ps3000aApi.h, in which those above interface should be created. I only found the PS3000A_PWQ_CONDITIONS, without _V2(Version 2? might be).
I guess the ps3000aApi.h attached in the PS3000asdk_r10_4_3_5 was not the latest one?
Could the support engineer give some help? Thank you in advance.