Test and Measurement Forum

print options

Forum for discussing PicoScope version 6 (non-automotive version)

print options

Postby Tester » Wed Jul 04, 2012 10:34 am

Hello,

I have three different questions to your print options. I'm using PicoScope 6.6.28.1

1.) Is it possbile to print a measurment over more than one DIN A4 site in one printjob? For example with a horizontal zoom 2x over 2 sites. In the print preview I also just see the actual graph...

2.) Is it possible to print over more than buffer-window which is shown in PicoScope? For example I have 3 windows, or 3 buffer of one measure.

3.) Is it possible to create a legend for Signals? I had the case to record at first 4 signals and than again 3. Because of one master signal I can arrange them correctly with saving it as reference. Now I want to print them and to read ít correctly I need to name the signals.

Thanks for your help!
Tester
Newbie
 
Posts: 0
Joined: Wed Jul 04, 2012 9:26 am

Re: print options

Postby ziko » Fri Jul 06, 2012 10:20 am

HI thank you for your post.

I am not sure I fully understand your post, what do you mean by site?

The second question, if you are asking if you can print different views or buffers with one print statement as separate sheets then this is not possible.

In terms of your last signal, I assume you are using multiple reference waveforms, there is no legend available. I assume you know what you can change the colours of each of the reference waveforms, but I understand with multiple signals you want to see it more quickly by using a legend.

I will forward your suggestions to our software engineers.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests