Test and Measurement Forum

TC-08 USB Error Code 15

Post any questions you may have about our current range of USB data loggers

TC-08 USB Error Code 15

Postby maurizio » Fri Apr 06, 2012 2:05 pm

I' m a new user of pico tc-08 usb.
Using usb_tc_08_get_temp function in labview 11, I have a return error code 15.
That's undocumented error or my trivial mistake.
usbtc08.dll version running on xp
Thanks in advance for any help,
Posts: 0
Joined: Fri Apr 06, 2012 1:50 pm

Re: TC-08 USB Error Code 15

Postby Martyn » Tue Apr 10, 2012 2:41 pm

This error is detailed in usbtc08.h, but hasn't made the documentation yet :oops:

Code: Select all
typedef enum enUSBTC08Error
  User/Developer error codes
  USBTC08_ERROR_OS_NOT_SUPPORTED,         /* need to use win98 (or later) or win2k (or later) */
  USBTC08_ERROR_INVALID_PARAMETER,      /* one or more of the function arguments was invalid */
  USBTC08_ERROR_VARIANT_NOT_SUPPORTED,  /* the hardware version is not supported (download the latest driver) */
  USBTC08_ERROR_INCORRECT_MODE,         /* an incompatible mix of legacy and non-legacy functions was called
                                           ... or usb_tc08_get_single was called while streaming was active */
  USBTC08_ERROR_ENUMERATION_INCOMPLETE, /* a second call to usb_tc08_open_unit_async() was made before
                                           asynchronous enumeration had completed */

  Reserved Pico error codes
  USBTC08_ERROR_NOT_RESPONDING,         /* unit is not responding to the driver */
  USBTC08_ERROR_FW_FAIL,                /* unabled to download firmware */
  USBTC08_ERROR_CONFIG_FAIL,              /* missing or corrupted eeprom */
  USBTC08_ERROR_NOT_FOUND,                 /* cannot find enumerated device */
  USBTC08_ERROR_THREAD_FAIL,            /* a threading function failed */
  USBTC08_ERROR_PIPE_INFO_FAIL,         /* could not get pipes from the device */
  USBTC08_ERROR_NOT_CALIBRATED,          /* no calibration date was found */

  New User/Developererror codes
  USBTC08_ERROR_COMMUNICATION           /*the PC has lost communication with unit*/
  }   USBTC08_ERROR;

It means you have lost communication with the device, possibly due to the USB not providing sufficient power to it as it starts operating.
Technical Specialist
Site Admin
Site Admin
Posts: 2594
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests