Test and Measurement Forum

storing field data in ADC-212/3

Which product is right for your exact requirements

storing field data in ADC-212/3

Postby Adam » Sat Aug 28, 2004 3:38 pm


I am considering purchasing ADC-212/3 scope plus rechargable battery pack for recording field vibration data. As previously advised this scope should be able to record an accelerometer signal for 60 secs at a sampling rate of 400 samples/s = 24000 samples.

Is it possible to record (started using external trigger) and store field data in the ADC-212/3 scope without the laptop connected?? I would like to download data to laptop after the field test is complete.


Postby Sarah » Tue Aug 31, 2004 1:44 pm

Hi Adam

Thank you for your post.

The ADC-212/3, along with all of our ocilloscope units needs to be connected to the PC to log data. It is controlled using the software and therefore cannot operate remotely.

Best regards

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest