Pin 4 should be connected to the -ve of the battery feeding the bridge, however you must use a battery of around 4.5V otherwise you will be operating outside the range of the PT104. The other part to check is that you are selecting the correct differential setting in your call to UsbPt104SetChannel,...

Which device are you running ?

I haven't had time to build drivers as yet but will hopefully do so soon as we have some additional staff in the support department

Yes it should do although you will need to make sure that PicoLog wasn't already connected to the device.

In the attached status file

You may wish to look at our PicoScope 6 software which will work at faster rates with the device, otherwise writing your own software is the other option.

Please check the specification here http://www.picotech.com/multi-channel-daq.html

Maximum continuous streaming rate with your own software would be 100ks/s shared between the active channels.

Please take a look at the manual http://www.picotech.com/document/pdf/ps9000-en-3.pdf in particular Menu->TriggerMenu->Source which will explain the different options available

Which scope do you have and are you running the automotive version of the PicoScope 6 software ?

External direct trigger, external prescaled trigger, internal clock trigger, and clock recovery trigger

Please see full specification http://www.picotech.com/picoscope9200-s ... tions.html

Please try the attached PS5000.dll driver file

The AWG uses a phase accumulator to synthesize the output waveform from the samples in the waveform buffer, hence the equation to define phase from frequency. Your buffer contains a waveform with both a positive and negative component defined in 4096 samples, the positive part taking up the first ha...

Can you send me an exact copy of the contents of the arbitrary waveform buffer that is passed to the driver.

I am out of the office today. If you are getting low/zero values out then they are probably in the buffer. Therefore I would suggest you look carefully at the data populating the waveform buffer as I am guessing that when you are reading your file in and populating the buffer some erroneous values a...

Providing you are not looking at mains then any of our scopes would fit the bill. The entry level Picoscope2204 http://www.picotech.com/entry-level-oscilloscopes.html or, if you need to look at digital signals and decode serial communications, then the PicoScope 2205MSO http://www.picotech.com/mixed...