I think I've found the problem. Senor number 4 was disabled. Sensor 1-3 worked alright but 5-12 didn't change colour. When I enabled sensor 4 and sent the information to the loggers, sensor 5-12 worked normally again.
Hi again! It's been some time now and I'm wondering if something happens about the software update. It's still a bit annoying that you have to update the list to see the alarms and there has been some misunderstandings because of that. You have to wait until the temerature is ok before you update it...
Thank You for your reply: "Hi I have managed to recreate your problem, this seems to be a problem with refreshing the display. I noticed that if you go into Settings->Monitors-> Channels and then click on exit it updates the display. The device works perfectly fine its jut the monitor view is not ...
Hi could you send me your ini file? this is located by default in the following location: C:\Program Files\Pico Technology\EnviroMon\ Regards Hello Zeke, There is an autodialer connected to the system and it works alright, just as information. Here is the text in the ini-file: [Logger1] Connection=...
Hi, I had a problem with the Enviromon system. Some buttons were green when alarming. I had made an update of the configuration without turning off all sounding alarms so I suspected that it was the problem. So I reseted all configuration and started all over again. That worked fine, but after a whi...
Hello! I need to know how to connect the alarmunit EL042 and the speech dialler EL019. I have managed to get the dialler to work by connecting 0V and TRG1 but I would like to know how to connect the pins from the RS232-contact from the alarm & relay into the dialler. I have solved the problem. I ha...
I need to know how to connect the alarmunit EL042 and the speech dialler EL019. I have managed to get the dialler to work by connecting 0V and TRG1 but I would like to know how to connect the pins from the RS232-contact from the alarm & relay into the dialler.
Hi ! I have a USB TC-08 connected to the computer through a USB to ethernet extender. After running a couple of days the logger loose contact with the computer. Is it possible that this is a softwareproblem? I have read that it is possible to change the samplingrate so I'm thinking of reducing it if...
I have used a my USB-TC-08 with a USB to ethernet equipment, but I have a problem. It worked for about 2 days. Then the program freezed and I had to close down the computer. This was when it was connected to a USB1-port. I tried again and connected it to a USB2-port. It worked for 3 days. I pulled o...