OK!

But about of the noise level solution?This is the my big problem.

Thanks.

According the table of the page 17, the question is about the select of mode "high" or "low".

As select the mode high of the time base?

Is necessary select this the mode for a test, what procedure must be utilized?

Hi, The measures must be realized in the time of 500 milliseconds. The number of measures must be equal to 500. All channels feature noise. A test of measure realized with a battery of 9 V too presented the noise What you mean when refers to the PicoScope 6? The index of 20000 don't generates 999us....

Hi, The response of question is present in the data below: Call ps4000SetChannel(handle, 0, 1, 1, 12) Call ps4000SetChannel(handle, 1, 1, 1, 3) Call ps4000SetChannel(handle, 2, 0, 1, 12) Call ps4000SetChannel(handle, 3, 0, 1, 12) timebase = 20000 no_of_samples = 500 status = ps4000GetTimebase(handle...

Hi!

I need to make measurements with acquisition time of 1000 samples per second. I'm using the block mode. The measurements made show a lot of noise when using voltages in millivolts

Thanks.

changing the integration time on the PicoScope 4424 model example for VB?