I am running winXP (Win7 was just another test that failed). PicoLog version is 5.22.6, have upgraded but no difference. With regards to the post about the switching relay, try increasing the scan time for each of the channels in the Edit Measurement dialog (this will have an impact on the frequency...

A comment regarding my question about the switching relay... I want to run a TC-08(USB) with a PicoScope 2205. My goal was to run the scope at 1kHz samplerate and the tempsensor at about 1s samplerate. 1.) If I want to use two devices I need to run in 'real-time continous mode'. 2.) If I want to use...

Thank you for a long answer, but sigh.... :( 1.) The scope won't connect using the exact same *.pls-file as last week, using scope2205 + TC-08. Disconnect TC-08, scope connects, disconnects scope, TC-08 connects... Remade the *.pls file and it is back to normal. 2.) Tries to add the B-channel of the...

I'm using the SW supplied on the CD (PicoLog release 5.22.1) for the XP-computer and the latest and greates from the web for the Win7 computer. I just got the XP-computer to work and did nothing different that I am aware of !? (Win7 still not working...) Doesn't the USB driver have to be the same fo...

I would like to add that:

If I have the Picoscope installed with the Picoscope SW (and driver) and install the Picoscope
in PicoLog, the Picoscope works fine in PicoLog. If I after that install the TC-08 in PicoLog the Picoscope
is not availabe as a choise in PicoLog any more.

(( Per

I just bought a PicoScope 2205 and a TC-08 (USB), but I can't make them work at the same time i PicoLog. I have tried it on two computers, one running XP and another running Win7. I have just checked on the Win 7 and there I can't make the PicoScope install properly just using the PicoLog Software. ...