With sw rls 5.11.6 I check the box for enable the output, then I fix any frequency (1000 or 5000 or 100000 Hz) but at the output still to 5 Hz amplitude ca 3.5 Volt.
I boght the unit a weeck ago, remember that before the software upgrade the signal generator working well!
In your opinion the problem it's depending of the sw or the hw is broken?
Thank you for your information I have tested the latest version r5.11.6 with the different ADC-212 unit models available and did not find any problems. The frequency I specified in the signal generator dialog box was the frequency output by the unit.
The latest version available from our website is r5.11.6, is this the version that you had problems with.
I'm to confirm that with Italian language installation still have problems.
With English language installation release 5.11.6 work well.
Another information for sw developer: the form of dialog box is different between English and Italian installation.