Post general discussions on using our drivers to write your own software here
Robin
Advanced User
Posts: 558 Joined: Fri Sep 19, 2008 10:17 am
Post
by Robin » Wed Jun 02, 2010 9:55 am
Here is the updated driver...
Attachments
PS2000.zip
(346.63 KiB) Downloaded 306 times
andresol
Newbie
Posts: 0 Joined: Wed Apr 07, 2010 2:52 pm
Post
by andresol » Tue Jun 08, 2010 7:59 am
I found the same streaming problem with my picoscope 4424. Is there an updated driver to fix the bug also for this model?
Thanks a lot
Robin
Advanced User
Posts: 558 Joined: Fri Sep 19, 2008 10:17 am
Post
by Robin » Tue Jun 08, 2010 1:51 pm
Hi
We believe we have fixed this problem with the 4000 now as well.
We are currently testing the fix and I will post a new DLL here as soon as it is available.
Robin
Robin
Advanced User
Posts: 558 Joined: Fri Sep 19, 2008 10:17 am
Post
by Robin » Wed Jun 16, 2010 8:37 am
Here is the new driver for the PicoScope 4000 series.
andresol
Newbie
Posts: 0 Joined: Wed Apr 07, 2010 2:52 pm
Post
by andresol » Thu Jun 17, 2010 7:32 am
First of all, I would like to thank for the support.
I've tested the new ps4000 driver in streaming mode, but again the acquisition of my ps4424 stops at about 33MS, whatever sampling frequency I set.
I'm using labview to control the scope and I probably need also a new ps4000wrap dll, right? Otherwise, I don't know how to fix my problem.
Thanks again
Robin
Advanced User
Posts: 558 Joined: Fri Sep 19, 2008 10:17 am
Post
by Robin » Mon Jun 21, 2010 12:18 pm
Hi
Sorry, I posted the wrong version of the driver. You don't need a new version of the wrapper DLL.
This one should be OK.
Let me know how you get on
Robin
Attachments
PS4000.zip
(361.25 KiB) Downloaded 322 times
stefanwiesner
Newbie
Posts: 0 Joined: Sat Feb 27, 2010 1:51 pm
Post
by stefanwiesner » Thu Sep 23, 2010 7:58 am
Hi Robin,
after a long time a got a chance to test your new dll. (version 2.0.8.32). unfortunately it has the same problem as the old one, so it hangs after 70 minutes. can you check if you posted the right dll?
thanks,
Stefan
andresol
Newbie
Posts: 0 Joined: Wed Apr 07, 2010 2:52 pm
Post
by andresol » Mon Apr 18, 2011 1:50 pm
Hi
The driver for 4424 works very well also in streaming mode, now.
Unfortunately, I found the same problem with my new ps4227: it stops after the collection of about 33M samples, whatever sampling frequency I set.
What can I do?
Thanks a lot
Regards
Chris
Site Admin
Posts: 169 Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots
Post
by Chris » Thu Apr 28, 2011 9:25 am
Could you send details of the ps4000.dll driver version you are using to
support@picotech.com