Test and Measurement Forum

sample VB.net program for two Picoscopes (4824)

Having problems ? let us know the details here

sample VB.net program for two Picoscopes (4824)

Postby Samba » Mon Jul 17, 2017 2:50 am

I am trying to write a VB.net program to capture data from two Pico scopes (4824). I installed the Pico SDK and was trying to use the sample program (PS4000A_sigAWG.vbproj) available under PS4000a\VB.Net\. However it is written for AWG and not for scope.

Tried using the excel example, but with no success.

Just want to have a working program for me to build on it further. Request you to send a sample VB.net program which can capture measurements from two Picoscopes (4824) . The measurements can be made on one channel (Ch A) in each scope.


Posts: 1
Joined: Thu Jul 06, 2017 3:00 am

Re: sample VB.net program for two Picoscopes (4824)

Postby Hitesh » Mon Jul 17, 2017 8:02 am

Hi Samba,

Our software examples are now hosted on GitHub and you can find our VB .NET examples in a repository.

You should be able to adapt the block example if it is a block data collection that you require.

The PicoSDK installer will install drivers and other associated files.

Hope this helps,

Technical Support Engineer
Site Admin
Site Admin
Posts: 2790
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 1 guest