log view of frequency in spectrum analyzer? and x-y?

Forum for discussing PicoScope (version 5)
Post Reply

log view of frequency in spectrum analyzer? and x-y?

Post by Guest » Thu Jan 10, 2008 6:17 am

I'm a new user of a 3224 Picoscope, which I'll be using mostly in audio applications.

I've found how to use the spectrum analyzer, of course, and how to dial down the frequencies to look at just the audio spectrum. What I haven't found yet is how to change the frequency ruler from a linear view to a log view, if it's possible.

And yes, I found the switch to change the y-scale to log. I'm looking for the switch for the x-scale.

Speaking of x-axis and y-axis, is there an x-y setting in here somewhere? I tried the manual, came up empty.


Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Post by PeterF » Fri Jan 11, 2008 8:28 am

My understanding is that here is no log scale available for the x, (frequency) axis. At present, there is no x-y setting either in PicoScope6 but it should be coming soon. In the meantime, if you need x-y, you will have to use PicoScope5, R5.18.0 which does have x-y.

Post Reply