Chromebook support

Forum for discussing PicoLog
Post Reply
MBpicoaccount
Newbie
Posts: 0
Joined: Fri Jul 06, 2018 12:58 pm

Chromebook support

Post by MBpicoaccount »

Hello,

Is there Chromebook support planned for pico logger software and drivers?

If not, is there a workaround possible?

Many Thanks,

Mike
Martyn
Site Admin
Site Admin
Posts: 4568
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Chromebook support

Post by Martyn »

We have no plans to support Chromebook at the present time.

You could email support@picotech.com to see if there any possible workarounds although the stumbling block is likely to be the drivers.
Martyn
Technical Support Manager
rickard.von.essen
Newbie
Posts: 0
Joined: Thu Jun 18, 2020 8:27 am

Re: Chromebook support

Post by rickard.von.essen »

Running PicoScope 6 for Linux on ChromeOS with Crostini (Linux) seems to work fine. The UI looks a bit off on a high DPI screen but probably ok.
SheetsTech
Newbie
Posts: 1
Joined: Tue Sep 17, 2024 2:46 am

Re: Chromebook support

Post by SheetsTech »

I've got the Picoscope 6 running in linux on a chromebook. My question is whether a 2 channel Pico will be recognized over USB. I have a Owon 2 channel and sure the java gui software works fine, but when I connect the scope to USB, chromebook doesn't see it. If I plug certain microcontroller boards to USB, chromebook sees them and prompts to connect the device to linux. I checked the kernel support with dmesg and the USB chips on those microcontroller boards that succesfully connect over USB are explicitly supported. I have no idea which USB chip is on the Pico, but for it to work on chromebook it must be supported.

The question remains, does a 2 channel Pico have a chromebook supported USB chipset?
Post Reply