No triggering in PicoScope virtual box

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
emarcw
Newbie
Posts: 0
Joined: Fri Mar 09, 2018 7:45 pm

No triggering in PicoScope virtual box

Post by emarcw »

Hi, I am having trouble getting PicoScope 6 to work properly under Windows 7 running as a Virtual Box 5.2 guest on a CentOS 7 host. The scope (2206B) is recognized, and it will collect data in PicoScope 6, but only on the auto run, long interval mode (>=200 ms). Any shorter interval, and there is no signal (the trigger is never activated). I’ve tried configuring the VB guest with USB 2 or 3 but it doesn’t seem to make a difference. I also tried a KVM virtual machine, with the same results. Thanks in advance for any suggestions, Mike

Hitesh

Re: No triggering in PicoScope virtual box

Post by Hitesh »

Hi Mike,

What are the trigger settings that you are using?

If you select None for the trigger option in the Windows guest operating system, do you see a signal that would meet the trigger condition?

Regards,

Post Reply