PS3424 input range

Post your C and C++ discussions here
Post Reply
Posts: 0
Joined: Tue Mar 13, 2012 1:27 am

PS3424 input range

Post by skyerfree »

My signal's range is changed with time, when the signal is very weak, only a few microvolts, I can't obtain the data using 2V range. I have to change to 50mV range in my code.
However, using picoscope 6, it can always capture good data.
I use the same sampling rate, sampling interval and no of samples.
What others cause the difference?


Site Admin
Site Admin
Posts: 3883
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PS3424 input range

Post by Martyn »

Is Picoscope6 set to Auto for the channel, ie it is automatically changing the range because it detects a low signal level.
Technical Support Manager

Post Reply