I need to measure faster than 1 measurement per minute and would like to use DDE to write the current value to Excel and then use VBA to produce a short term high speed logger ( one reading per 10 secs ) Unfortunately the function =EMW|Current!Value just returns #N/A in software version R5.21.3 I saw a post from 2008 stating exactly the same problem. has anything changed in the meantime, or is there perhaps another solution.
Richard
Increasing the frequency of measurements
Re: Increasing the frequency of measurements
This topic is continued here http://www.picotech.com/support/topic10775.html
Martyn
Technical Support Manager
Technical Support Manager