Forum for discussing PicoScope (version 5)
-
gbohn
- Newbie
- Posts: 1
- Joined: Thu Jan 11, 2007 11:13 am
Post
by gbohn » Thu Jan 11, 2007 12:25 pm
The LabView- examples for picoscope 2105 (included in ps2000.zip , Software Release PicoFull_r5_15_6.exe, PicoFull_r5_15_4.exe) are not working with LabView 8.0 or LabView 7.1!!
All the files open_unit.vi, ps2000.vi (date 28.3.2006) are no valid LabView-VIs.
Please send me some correct LabView-VIs.
best regards.
Gunther Bohn
-
Attachments
-
- open_unit.vi
- lenth 1kB, no valid
- (582 Bytes) Downloaded 685 times
-
- PS2000.vi
- length 1kB, no valid
- (1.58 KiB) Downloaded 657 times
-
- set_channel.vi
- length 1kB, no valid
- (1023 Bytes) Downloaded 645 times
-
gruntman
- Advanced User

- Posts: 109
- Joined: Thu Sep 28, 2006 3:50 pm
Post
by gruntman » Tue Jan 16, 2007 3:08 am
Gunther,
The PS2000 .vi's are in fact invalid. I will look into this tommorrow and get back with you a working example for you to use.
Regards,
Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com
-
gruntman
- Advanced User

- Posts: 109
- Joined: Thu Sep 28, 2006 3:50 pm
Post
by gruntman » Wed Jan 17, 2007 7:27 am
Gunther,
The attached files contains the necessary .vi's and .dll for you to use the PicoScope 2100 series with Labview. If you have any questions regarding this feel free to contact me.
Regards,
Richard Boyd
Crag Technologies, Inc
http://www.pc-oscilloscopes.com
-
Attachments
-
- PS2100 Labview.zip
- (233.7 KiB) Downloaded 513 times