Waveform display is very slow, getting data is very slow

Post your C and C++ discussions here
Post Reply
guoduhua
Newbie
Posts: 0
Joined: Wed Nov 30, 2016 6:06 pm

Waveform display is very slow, getting data is very slow

Post by guoduhua »

I have a problem,very important,very urgent,please help me. :(
I use the PicoScope 5243B,connect the signal generator.I developed the program, according to your example:streamDataHandler function,and has displayed the waveform.
But the speed of graphics update is very slow, the speed of data acquisition is very slow, need to wait 30 seconds or 60 seconds to show a waveform.
That is why? :cry: Answer me please. Thank you very much!

alan
Site Admin
Site Admin
Posts: 195
Joined: Thu May 25, 2006 8:02 am

Re: Waveform display is very slow, getting data is very slow

Post by alan »

Please can you try collecting and displaying a similar amount of data in PicoScope software with the same trigger conditions / AWG settings. If PicoScope is working normally then we can rule out any hardware or driver issues and the problem seems likely to be in the code you have written.

We will need either a copy of the code or more details about what it is doing in order to help further.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Waveform display is very slow, getting data is very slow

Post by Martyn »

If you are having difficulty posting your code please email it to support@picotech.com and we can take a look.
Martyn
Technical Support Manager

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Waveform display is very slow, getting data is very slow

Post by Martyn »

Having you managed to perform the test in PicoScope 6 using similar settings ?

What version of the driver are you using with your code ?
Martyn
Technical Support Manager

Post Reply