Programming Problem

Post your LabVIEW discussions here
Post Reply
nagiramadan
Newbie
Posts: 0
Joined: Wed Sep 21, 2016 11:42 am

Programming Problem

Post by nagiramadan »

Hi,

I have Picoscope 2205A MSO and i want to use it in my application, So i tried a lot to open your examples in SDK ps2000A folder labView, C#, Excel put i have the same message unit not opened, Status = 3, handle = 0.
It works fine in your software picoscope 6. What i have to do.

Thanks

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Programming Problem

Post by Martyn »

Please make sure that the PicoScope 6 software is not open, and connected to the scope, when you try to run the examples.
Martyn
Technical Support Manager

nagiramadan
Newbie
Posts: 0
Joined: Wed Sep 21, 2016 11:42 am

Re: Programming Problem

Post by nagiramadan »

I am sure about that. PicoScope Software isn't opened..

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Programming Problem

Post by Martyn »

I just spotted that you have the 2205A MSO, I had originally read it as 2205MSO.

Please can you email support@picotech.com so we can provide you with updated drivers and examples for this model, the current SDK's on the web were published before this model was released.
Martyn
Technical Support Manager

nagiramadan
Newbie
Posts: 0
Joined: Wed Sep 21, 2016 11:42 am

Re: Programming Problem

Post by nagiramadan »

Thanks a lot.

Post Reply