Spctrum analysis 8Hz-1MHz

Post any questions you may have about our current range of oscilloscopes
Post Reply
heiner

Spctrum analysis 8Hz-1MHz

Post by heiner »

Which of your PC based products is the most suitable to analyse the spectrum in the range from 8 Hz to about 1 MHz or more? I want to analyse the magnetic and the electromagnetic nearfield of a given device. Do you have appropriate probes?

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

Our range of instruments will allow you to measure this spectrum range. A good starting point would be the 3224 instrument which has a DC to 10MHz spectrum range. Further information can be found here: http://www.picotech.com/pc-scope.html

We do not have the appropriate probes for this type of measurement. You will need to check with a specialist distributor.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

heiner

Post by heiner »

Hi Michael,
thaks for your reply and the information about your 3224 pc-scope. Now I will look for appropriate probes. Do I need extra software for the spectrum analysis or is it included?
Best regards
heiner

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

YOu will not need any additional software as PicoScope includes an FFT screen.

Many thanks,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply