Further details please

Which product is right for your exact requirements
Post Reply
Ali

Further details please

Post by Ali »

Hi, this is me again. Thank you for the answers.
If I’m interested in both the time domain and the frequency spectrum and my signal is a single shot that will last for a very short time (and cannot be repeated), is there a possibility that I’ll be unable to have both windows displaying the waveform and the frequency spectrum (for that short event). This rose in my mind because when I press the “goâ€

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Ali,

If you are looking for a single one-tiem event, you will need to use either spectrum or scope view. With the scope view you can export the waveform to excel to perform your FFT. Or you can use the FFT window and configure the trigger to capture the waveform and perform the FFT for you.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply