Satellite TV

Which product is right for your exact requirements
Post Reply
rick
User
User
Posts: 2
Joined: Sun Sep 25, 2005 5:21 pm
Location: Torbay

Satellite TV

Post by rick »

I need to analyze data from DVB-S receiver. Eye diagrams etc. Having problem getting my ADC-200 to do this. Which new model better?
rick

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Rick,

What is the output signal speed you need to measure?

Regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Guest

Post by Guest »

Essentially 25Mbit/sec. The data is QPSK which demodulates into two data streams. The difficulty comes because the QPSK constellation is not stabilised. Basically, I need better triggering and rise/fall times. Can I display sample points as dots instead of joined-up lines? Then the 10Gsample feature on later models would give good eye diagrams at this and higher data rates.

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

Then please consider our 3205 or 3206. These instruments would offer high sampling rates and deep memory. Allowing you to capture fast sampling data streams over longer periods.

Further information can be found here:
http://www.picotech.com/oscilloscope-sp ... tions.html

If you purchase before the end of the week, you can take full advantage of our 15% anniversary offer!

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply