Oscilloscope Mode and AWG Mode

Post any questions you may have about our current range of oscilloscopes
Post Reply
desk7
Newbie
Posts: 0
Joined: Fri Apr 29, 2016 6:05 pm

Oscilloscope Mode and AWG Mode

Post by desk7 »

Is it possible to use the PICOSCOPE 2204A in the Oscilloscope mode and AWG mode at the same time so that I can use the AWG as input signal of my circuit and the oscilloscope to visualize the output signal?
Thanks

egonotto
Newbie
Posts: 0
Joined: Thu Mar 12, 2015 12:42 am

Re: Oscilloscope Mode and AWG Mode

Post by egonotto »

Hello,

i don't have the 2204A but i think this is possible with the 2204A too.

I do a sweep from an low frequency amplifier with gain 10 with the 5243A from 1kHz to 500kHz in 1kHz steps.

Best regards
egonotto
Attachments
Zoom in
Zoom in
Zoom in
Zoom in
Sweep from 1kHz to 500kHz
Sweep from 1kHz to 500kHz

Martyn
Site Admin
Site Admin
Posts: 3827
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Oscilloscope Mode and AWG Mode

Post by Martyn »

Yes it is possible :D
Martyn
Technical Support Manager

desk7
Newbie
Posts: 0
Joined: Fri Apr 29, 2016 6:05 pm

Re: Oscilloscope Mode and AWG Mode

Post by desk7 »

Thanks for the answers

Post Reply