3424 Channel D Amplitude

Forum for discussing PicoScope (version 5)
Post Reply
Don Holmes
User
User
Posts: 3
Joined: Fri Sep 09, 2005 5:36 am

3424 Channel D Amplitude

Post by Don Holmes »

When observing a signal on channel D with the PS3000 program the reading is always from the maximum scale value to some negative value. This occurs no matter which vertical scale is used.

I believe this only occurs with channel D.

The hardware is ok because when I use channel D with my own program, it scales the same as the other channels.

Don

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Don,

Thank you for this.

Please confirm the version of software you are using(Help-About).

THis will help us to find and fix the problem.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Don Holmes
User
User
Posts: 3
Joined: Fri Sep 09, 2005 5:36 am

3424 Channel D Amplitude

Post by Don Holmes »

Hi Michael,
I'm using version 5.13.3-32 bit

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Don,

The latest version of PicoScope is 5.13.7

Please download this from our website: www.picotech.com/software.html

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply