TC 08 USB wont change from ADC 12

Forum for discussing PicoLog
Post Reply
Michael Hayes
User
User
Posts: 3
Joined: Wed Jan 18, 2006 7:57 am
Location: Sydney

TC 08 USB wont change from ADC 12

Post by Michael Hayes »

I use an ADC 212, ADC 12 and TC08 (USB) regularly in Picolog and have encountered a problem where I can not set to TC 08 after using an ADC12
I have loaded the latest version and found no change. When I select the converter, I do not get a message to re-start and even when I do and then select input chanels, I get the dialogue box for an ADC12
The unit used to work and I can not see why it has stopped.
Any ideas would be welcomed as I have an urgent application.

Michael Hayes

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

You will not have to restart PicoLog to use another instrument. If your PicoLog is failing to let you select any other converter, go to the Pico Root folder and delete the files called RECORDER.PLS.

This should enable you to restart PicoLog from afresh.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Michael Hayes
User
User
Posts: 3
Joined: Wed Jan 18, 2006 7:57 am
Location: Sydney

Post by Michael Hayes »

Michael,
Not long after I made the post, it started working for no good reason but I have seen this problem before and welcome the method of rectifying, Thanks
Michael Hayes

Post Reply