Capturing data in Block Mode

Post your LabVIEW discussions here
Post Reply
User avatar
fabian
Newbie
Posts: 0
Joined: Thu Jul 02, 2015 12:22 pm

Capturing data in Block Mode

Post by fabian »

Hello,

I've got a Picoscope 6404D, capturing data in Block Mode.
Due to the memory of the cope (that is 2GS), I should be able to capture exactly this amout of data or at least 1 GS.
While reading out the buffer with LabVIEW in Block Mode the maximum value of Samples I can catch is something around 25MS. Does someone have any experience in filling the whole buffer and transmitting the data to LabVIEW?
I'm really not sure, if this is a issue with Picoscope or LabVIEW.

Thanks.
-Fabian
Remember why you started and make it work.

Hitesh

Re: Capturing data in Block Mode

Post by Hitesh »

Hi Fabian,

What settings (channel, trigger, timebase and pre- & post-trigger samples) are you using for your data capture?

Are you just capturing a single block of data?

Regards,

Post Reply