pico adc 200/20

Discussion forum for the Picoscope 6 Linux software
Post Reply
easy455
Newbie
Posts: 0
Joined: Sun Jul 12, 2015 9:29 am

pico adc 200/20

Post by easy455 »

Hi all would I be able to use an adc200/20 to check a cdi diesel injector to see if the pilot injection is working if so what would I need? Thank you in advance.

Hitesh

Re: pico adc 200/20

Post by Hitesh »

Hi easy455,

Are you looking to use the PicoScope 6 for Linux software? If so, the ADC200/20 would not be supported by this software and we currently do not have an Automotive version.

You may wish to ask this question on our Automotive Support Forum where a member of our community should be able to assist.

Regards,

easy455
Newbie
Posts: 0
Joined: Sun Jul 12, 2015 9:29 am

Re: pico adc 200/20

Post by easy455 »

Thank you Hitesh.

Hitesh

Re: pico adc 200/20

Post by Hitesh »

Hi easy455,

Just a few other things to note:
  • The ADC200/20 is an 8-bit resolution device
  • Attenuators would need to be used
  • The device could only be used with the legacy PicoScope 5 software for waveform capture

Post Reply