Measuring current with the ADC-16

Post any questions about our serial port products
Post Reply
Deke
Newbie
Posts: 1
Joined: Tue Jun 21, 2005 8:59 am
Location: Aberdeen, Scotland

Measuring current with the ADC-16

Post by Deke »

Urgent.

How do I measure a voltage on one channel and measure the current of that channel with another channel?

Thanks.
Top
Sarah

Post by Sarah »

Hi

Thank you for your post.

To measure a current you will need to use a shunt resistor as the unit only accepts voltage inputs. The exact wiring of how to set this up is not something that I am able to advise on.

Best Regards
Top
Post Reply

Return to “Serial Port Products”