adc212 serial no.

Forum for discussing PicoScope (version 5)
Post Reply
john weddup

adc212 serial no.

Post by john weddup »

Hi I have an adc212 plus I purchased the automotive software on cd at a later date.

I wish to upgrade software but cannot see my serial no. on unit. My current version is 5.09.0.

thanks

john

Sarah

Post by Sarah »

Hi

Thank you for your post.

If you go to Help | About in the software which you already have, then the dialogue there will tell you your serial number.

Hope this helps

Best Regards

john weddup

Post by john weddup »

thankyou for your very quick reply. I must be dafter than I thought I was as I still cannot find serial no.

Any further help would be gratefully received.

thanks

john

Sarah

Post by Sarah »

Hi John

Thank you for your post.

Open the software with the unit connected. What does help about say? The serial number is the same as the batch number so you may need to look for that instead.

If you still cannot see it then copy what help about says onto here and I will see if I can see it.

Best Regards

Post Reply