PicoScope 7 Software
Available on Windows, Mac and Linux
PicoScope 7 Software
Available on Windows, Mac and Linux
OEM & custom applications
PicoScope, Pico data logger and RF products can be used as components in custom applications and OEM projects.
A to Z of PC oscilloscopes
Everything you need to know about PC oscilloscopes from Advanced Triggers to Zooming.
A to Z of Data Loggers
Everything you need to know about PC-based data loggers from Alarms to Zooming.
Application Notes
Details of some of the many applications for Pico data logger and oscilloscope products.
How do I measure...?
Find out how you can measure using Pico products
Videos
Showing you how to get the most out of PicoScope oscilloscope software.
Documentation
Up-to-date versions of the documentation supplied with your products in PDF format.
Educational Experiments
Our library of science experiments suitable for use with oscilloscope and data logging products.
PicoApps
Want to share hints, tips and code with other developers? Show your Pico-based products to the world.
Newsletter
Archive of our monthly Test and Measurement Newsletters.
Post by KJagielski »
Code: Select all
run('MATLAB\ps5000a\PS5000aConfig.m');
pico = icdevice('picotech_ps5000a_generic','TEST/001');
connect(pico);
I have tried MATLAB 32bit to exclude a problem with the 64bit driver with the same error.Copyright (C) Pico Technology Ltd. 2013 - 2014
PicoScope 5000 Series MATLAB Instrument Driver
Warning: The data type 'FcnPtr' used by function ps5000aRunBlock does not exist.
Warning: The data type 'FcnPtr' used by function ps5000aGetStreamingLatestValues does not exist.
Number of units found: 1
Serial number(s): CT607/118
>> connect(pico);
Opening PicoScope 5000 Series device...
Instrument Device Object Using Driver : picotech_ps5000a_generic.mdd
Instrument Information
Type: Oscilloscope
Manufacturer: Pico Technology Ltd.
Model: PicoScope 5000 Series
Driver Information
DriverType: MATLAB generic
DriverName: picotech_ps5000a_generic.mdd
DriverVersion: 1.1.20
Communication State
Status: open
Setting Device Parameters...
Error using icdevice/connect (line 112)
An error occurred while executing the driver connect code.
Unit not supported
If this error is not an instrument error, use MIDEDIT to inspect the driver.
Post by Hitesh »
Code: Select all
pico = icdevice('picotech_ps5000a_generic','TEST/001');
Code: Select all
pico = icdevice('picotech_ps5000a_generic','');
Code: Select all
pico = icdevice('picotech_ps5000a_generic','CT607/118');
Post by KJagielski »