TC-08 USB

Post any questions you may have about our current range of USB data loggers
Post Reply
senthilkumar
Newbie
Posts: 0
Joined: Sat Jul 26, 2014 6:31 am

TC-08 USB

Post by senthilkumar »

iam using 2 no of TC-08 USB loger for TUS (Temperature uniformity), i required 15 inputs and i conected 15 thermocouple with 2 no of TC-08 USB.

15 data (reading) i can see in the PLW recorder, but in view spreadsheet i can able to see only 12 reading.
what is the problem and how i can get 15 datas from 2 no of TC-08 USB.

Karunen
Advanced User
Advanced User
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am

Re: TC-08 USB

Post by Karunen »

Hi senthilkumar,

What version of PicoLog are you using?

I tested with two TC-08s using PicoLog and I am able to see 15 channels in the spread sheet view.

Would you be able send a PLW file with this issue to support@picotech.com?
So I can have a look at the the settings you are using.

Kind Regards,
Karunen

Technical Specialist
Pico Technology

senthilkumar
Newbie
Posts: 0
Joined: Sat Jul 26, 2014 6:31 am

Re: TC-08 USB

Post by senthilkumar »

Thanks for your reply,

actually i have made mistake in spreadsheet setting (select parameter), here i have selected only 12 points.

now i have selected 15 points and working good,

once again thanks for your support

DAVEW
Newbie
Posts: 0
Joined: Mon Feb 02, 2015 4:24 pm

Re: TC-08 USB

Post by DAVEW »

Hi

I recently purchased 10 TC-08 USB boards and today if the frist time we have used them.

I have conencted 44 thermocouples to 6 devices.
I have changes the input to monitor all 44
I have renamed 32 channels to T1-T32 and this has been saved

But when I run the test I can only see 15 records on the spreadsheet and 18 records are displayed on the graph, how do i get all 44 to record and display.

Dave

Hitesh

Re: TC-08 USB

Post by Hitesh »

Hi Dave,

The PicoLog software limits the number of channels that can be displayed at one time. However, the data will still be logged to file.

The workaround for this is to group channels in the Graph and Spreadsheet views and then select which group you wish to view.

Please see the latter part of section 9 of the PicoLog Self-Help Guide (https://www.picotech.com/legacy-documen ... uide-1.pdf) for further information.

If you need to view all the traces during capture, you will have to consider running separate instances of the software with no more than two TC-08 devices controlled by each one.

Regards,

Post Reply