Hi,
Whenever I attach the pico module (I'm using the ADC-100) the software seems to register an input even with the probe shorted.
The reading displayed is often nonsensical (for instance - 5Hz when logging frequency on PicoLog).
On PicoScope I can 'zero' settings using 'Offset Null'- is there a similar function for PicoLog?
I've downloaded the latest software, but the problem is still there- can you help?
Regards
Nick
It sounds as if you need to use the ADC-100 adaptor for incompatible parallel ports. This adaptor is supplied with the unit.
When you are using this adaptor you will need to tell the computer so that it recognises that it is there. To do this you need to insert the following patch into the win.ini file:
[ADC100]
UseAdapter=Yes
You should insert the patch on a new line and exactly as written above. When you have done this, save the file and exit. The Picoscope software should now recognise the adaptor and report "Use Adapter" in Help | About. The ADC-100 should also now be functioning normally.
The patch should be added on it's own, on new lines. It should not overwrite anything. Due to the nature of the win.ini file you should not delete or overwrite anything unless you know you can.
The bit which you mention in the win.ini file is relating to a different feature in the software whereby it knows if you are using it for the first time. You should leave these lines unaltered.