BNC adapter for probes

Which product is right for your exact requirements
Post Reply
Rubens
Newbie
Posts: 0
Joined: Fri Apr 11, 2014 12:07 am

BNC adapter for probes

Post by Rubens »

Hi everyone. I need a 150 MHz probe (TA132) but unfortunately the pictures related to this product don't reveal if a BNC adapter is included in the package. This accessory is essential to me - could someone give me any info on this? thanks

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: BNC adapter for probes

Post by Martyn »

The BNC connector is part of the probe, no adapter required
ta132.jpg
Martyn
Technical Support Manager

Rubens
Newbie
Posts: 0
Joined: Fri Apr 11, 2014 12:07 am

Re: BNC adapter for probes

Post by Rubens »

Unfortunately the question was not understood. I am referring to a BNC - tip of the probe adapter. This is the correct way of connecting a probe to a BNC output, taking full advantage of the probe bandwidth. Many probe manufacturers include this accessory and it's not clear if Pico includes as well, as it doesn't appear in the photos. Thanks.
Attachments
Adapter2.jpg

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: BNC adapter for probes

Post by Martyn »

Sorry for misunderstanding the question, yes it comes with one of those as part of the accessory pack
Martyn
Technical Support Manager

Post Reply