Can I use math channel in LabVIEW software?

Post your LabVIEW discussions here
Post Reply
mino
Newbie
Posts: 0
Joined: Wed Mar 12, 2014 8:09 am

Can I use math channel in LabVIEW software?

Post by mino »

Hello,

I know that the Picoscope program offers some Math channel.
I want to the average of Math channel, but I can't find the LabVIEW software.
So, I accumulate data in my computer and average.

I want to get the data of averaged data.
I hope that the LabVIEW software support Math channel.

Minho

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can I use math channel in LabVIEW software?

Post by Martyn »

Picoscope 6 Maths Channels are only available within the software itself. You will need to create your own maths channels in Labview, either directly or by using third party software.
Martyn
Technical Support Manager

Mmm22
User
User
Posts: 2
Joined: Mon Jun 15, 2020 9:21 am

Re: Can I use math channel in LabVIEW software?

Post by Mmm22 »

Are the math channel calculations performed purely in the Picoscope software, and no processing in the hardware is involved?

AndrewA
PICO STAFF
PICO STAFF
Posts: 401
Joined: Tue Oct 21, 2014 3:07 pm

Re: Can I use math channel in LabVIEW software?

Post by AndrewA »

Yes the Picoscope 6 Maths Channels are done in software, the scopes hardware is not used.
Regards Andrew
Technical Specialist

Mmm22
User
User
Posts: 2
Joined: Mon Jun 15, 2020 9:21 am

Re: Can I use math channel in LabVIEW software?

Post by Mmm22 »

AndrewA wrote:
Thu Jul 30, 2020 12:29 pm
Yes the Picoscope 6 Maths Channels are done in software, the scopes hardware is not used.
Hi Andrew,
topic13697.html states that the data representation speed over USB is achieved by means of downsampling. Does that mean that the Math Channels use the downsampled data for calculations?

AndrewA
PICO STAFF
PICO STAFF
Posts: 401
Joined: Tue Oct 21, 2014 3:07 pm

Re: Can I use math channel in LabVIEW software?

Post by AndrewA »

Hi,
Yes Picoscope 6 Math Channels use the downsampled data for calculations.
Regards Andrew
Technical Specialist

Mmm22
User
User
Posts: 2
Joined: Mon Jun 15, 2020 9:21 am

Re: Can I use math channel in LabVIEW software?

Post by Mmm22 »

AndrewA wrote:
Mon Aug 17, 2020 1:41 pm
Hi,
Yes Picoscope 6 Math Channels use the downsampled data for calculations.
Is it possible to make the Picoscope software use complete data for math channels and measurements?

Post Reply