PicoScope 7 Software
Available on Windows, Mac and Linux
Data logger suitability query
-
Mike Roach
- Newbie
- Posts: 0
- Joined: Mon Dec 02, 2013 11:31 am
Data logger suitability query
Hi All,
I am wondering if it is possible to use a data logger to interpret a signal from either a photovoltaic cell or LED and sensor. I am hoping to pass material past a sensor, when the material passes the sensor it interrupts the light source and a signal can be generated. Is there a data logger suitable with the software to receive and analyses the signal
Ideally I need a minimum of three inputs into the logger with an ideal number of five inputs/sensors.
Any help would be greatly appreciated
Mike
I am wondering if it is possible to use a data logger to interpret a signal from either a photovoltaic cell or LED and sensor. I am hoping to pass material past a sensor, when the material passes the sensor it interrupts the light source and a signal can be generated. Is there a data logger suitable with the software to receive and analyses the signal
Ideally I need a minimum of three inputs into the logger with an ideal number of five inputs/sensors.Any help would be greatly appreciated
Mike
-
Hitesh
Re: Data logger suitability query
Hi Mike,
How long do you need to capture data for and at what sampling interval?
What is the output voltage of your sensors?
You may wish to take a look at the PicoLog 1000 series (http://www.picotech.com/multi-channel-daq.html) or the ADC-20/24 (http://www.picotech.com/precision-data-acquisition.html).
Regards,
How long do you need to capture data for and at what sampling interval?
What is the output voltage of your sensors?
You may wish to take a look at the PicoLog 1000 series (http://www.picotech.com/multi-channel-daq.html) or the ADC-20/24 (http://www.picotech.com/precision-data-acquisition.html).
Regards,