3206-MSO increase display left margin

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

3206-MSO increase display left margin

Post by blachanc »

3206-MSO increase display left margin:

Hi,

I am using a 3206-MSO with a Raspberry PI & gertboard.

I renamed my digital channels to:

BUF1 (D0)
..
BUF7 (D6)

Unfortunately, in picoscope, I only see BUF (I need to hover over the
signal to see the full name "BUF1:D0"),
and I did not find a way to increase the margin size.

Is it possible to increase the margin width, to display the full name of
the signal ?

Regards,

Ben
Attachments
zoomed_view.jpg

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

Hi,
could I get some feedback from PICO on this question please?

I understand that this might not be possible at the moment
but it would be a nice feature.

Ex, let the user chose the margin size between 3-8 char display.
snapshots of the waveform would be more meaningful when shared with
other people.
please refer to the example below.

Thank you,
Ben
Attachments
zoomed_view_modif.jpg

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3206-MSO increase display left margin

Post by Martyn »

It is not possible at the present time although we are looking at the display interface as we consider the impact of the touchscreen orientated Windows 8. I will pass on your comments to the development team.
Martyn
Technical Support Manager

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

Hy Martyn,

Got It,
I work all day long with RTL(vhdl/verilog) simulator,
so I am used to be able to rename signals & display the modified name.

Hopefully this feature will be added, but I understand
that it may be too difficult to implement.


Regards

Benoit

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

Hi,
I just wanted to wake this topic from the dead, just so it can be loked at again

Ben

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

blachanc wrote:Hi,
I just wanted to wake this topic from the dead, just so it can be looked at again

Ben

Bump..

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3206-MSO increase display left margin

Post by Martyn »

I have seen this but not had a chance at present to check if there is any movement
Martyn
Technical Support Manager

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

Hi,
Should I consider this suggested improvement as dead?

Thanks,

Ben

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3206-MSO increase display left margin

Post by Martyn »

No it is on the list, so I have raised the profile of this for a features meeting the team are holding later this week.
Martyn
Technical Support Manager

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: 3206-MSO increase display left margin

Post by blachanc »

Martyn wrote:No it is on the list, so I have raised the profile of this for a features meeting the team are holding later this week.
Great,
I will wait for your feedback,

Thank you,

Ben

Post Reply