Square wave problem

Post any questions you may have about our current range of oscilloscopes
Post Reply
Fivetide
Newbie
Posts: 0
Joined: Mon Jun 17, 2013 7:28 pm

Square wave problem

Post by Fivetide »

Hi I bought my new probes got Picosco today and now calibrating them , I have a the 2205 and have got a good square wave out of the box , only thing is its dancing backwards and forwards on the horizontal to the left hand side, is this normal , is there anything I can do to stop this ?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Square wave problem

Post by Martyn »

Try setting trigger type from "None" to "Auto" at the bottom left of the screen, and ensure that the yellow diamond is located within the vertical range of the square wave.
Martyn
Technical Support Manager

Fivetide
Newbie
Posts: 0
Joined: Mon Jun 17, 2013 7:28 pm

Re: Square wave problem

Post by Fivetide »

Sweet work perfectly many thanks for that, there’s only one other thing , at the peak I get what looks like interference ?
Heres a vid of it I uploaded to the youpood

Is there anything I can do about this , I have set the BitRate to 10.

Post Reply