PICO MI031 BNC Plug to Crocodile Clips

Post any questions you may have about our current range of oscilloscopes
Post Reply
Fivetide
Newbie
Posts: 0
Joined: Mon Jun 17, 2013 7:28 pm

PICO MI031 BNC Plug to Crocodile Clips

Post by Fivetide »

Hi I have just a bought a 2nd hand Pico Scope 2205 off eBay , I want to learn electronics for Audio but don’t have that much money to spent on expensive equipment. The 2205 comes with the standard probe. What I ‘m asking is, could I use the PICO MI031 BNC Plug to Crocodile Clips to couple the AWG to a circuit?

Hitesh

Re: PICO MI031 BNC Plug to Crocodile Clips

Post by Hitesh »

Hi Fivetide,

This should be possible. The max/min output of the AWG is +/-2V. The output current will be low as there is a 600Ohm impedance at the AWG output.

I hope this helps.

Fivetide
Newbie
Posts: 0
Joined: Mon Jun 17, 2013 7:28 pm

Re: PICO MI031 BNC Plug to Crocodile Clips

Post by Fivetide »

Would I be better using a probe ? Thanks for your reply .

Hitesh

Re: PICO MI031 BNC Plug to Crocodile Clips

Post by Hitesh »

You can if you use the x1 setting.

Post Reply