Labview 2011 Problem with 3205MSO

Post your LabVIEW discussions here
Post Reply
ABrosi
Newbie
Posts: 0
Joined: Sat Feb 23, 2013 6:20 pm

Labview 2011 Problem with 3205MSO

Post by ABrosi »

Hi

I have problems to with the (ps3000 open unit.vi).
It returns me every time 0.

PC with
- Vista (32-Bit)
- Labview 2011

The PicoScope 6 software runs perfect.

Could someone help me to fix the problem?

Best regards
ABrosi

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Labview 2011 Problem with 3205MSO

Post by Martyn »

Make sure you are using the vi's from the 3000A SDK and not the 3000 one, and check that you don't have Pico scope 6 open as well.
Martyn
Technical Support Manager

ABrosi
Newbie
Posts: 0
Joined: Sat Feb 23, 2013 6:20 pm

Re: Labview 2011 Problem with 3205MSO

Post by ABrosi »

Hi Martyn

Thanks for your fast answer, it looks that it works now.
Of course i did not try to run the picoscope 6 software and the sdk together before.

Where is it written that it works only with the PS3000aSDK?


Thanks an best regards
ABrosi

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Labview 2011 Problem with 3205MSO

Post by Martyn »

If you go to http://www.picotech.com/software.html and select your product you are presented with a list of the software that will work with it.
Martyn
Technical Support Manager

ABrosi
Newbie
Posts: 0
Joined: Sat Feb 23, 2013 6:20 pm

Re: Labview 2011 Problem with 3205MSO

Post by ABrosi »

Hi

Thanks for the graet support, it works all fine now.

Best regards
ABrosi

Post Reply