Can't find converter

Forum for discussing PicoLog
Post Reply
gugge_x
Newbie
Posts: 0
Joined: Thu Aug 16, 2012 6:30 am

Can't find converter

Post by gugge_x »

Hi!

I have a PicoScope 3205B which i'm trying to use with PicoLog. But when I'm choosing PicoScope 3000-series in the setup, no devices appears. When a press the Refresh-button the programs searches a second or two, but dosn't find anything. I'm currently not running PicoScope and the oscilloscopes appears in the device manger. I have no problem running PicoScope 6 with my device.

Best Regards
Gustav Rydahl

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can't find converter

Post by Martyn »

The 3205B is one of the newer 3000 series scopes, it will not work with our old PicoLog software which is why it isn't found.
Martyn
Technical Support Manager

gugge_x
Newbie
Posts: 0
Joined: Thu Aug 16, 2012 6:30 am

Re: Can't find converter

Post by gugge_x »

Okey, have you any new PicoLog software or do you have any other idéa of how I should do to log data? I want to log a steady DC level for about 24 hours. I'm logging drift of a transducer.

Best Regards
Gustav

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can't find converter

Post by Martyn »

You can do some simple logging by using the Alarms feature of the Picoscope6 software. Take a look at http://www.picoscope.tv/general/using-alarms.html You will need to chose the scope settings carefully as a great deal of data can be provided by the scope in 24 hours.
Martyn
Technical Support Manager

Post Reply