ps4227 error codes

Post any questions you may have about our current range of oscilloscopes
Post Reply
AlXCo

ps4227 error codes

Post by AlXCo »

Hi, when I start my C# project and try to initialize the PS4227 there appears the error code 78 (0x4E). In the programmers guide the documented error codes only reach from 0x00 to 0x49.
So how can I find out what's causing the error?

Best regards!

Chris
Site Admin
Site Admin
Posts: 169
Joined: Tue Aug 17, 2010 9:00 am
Location: St. Neots

Re: ps4227 error codes

Post by Chris »

This error code would indicate an FPGA failure, which seems strange.

Could you try running the device using PicoScope 6.

If this works ok, could you check that your application is using the same PS4000.dll as the Picoscope application uses.

C:\Program Files\Pico Technology\PicoScope6

-Chris

Post Reply