streaming mode

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
stevecn

streaming mode

Post by stevecn »

hello,
I have recently bought a 3204 and I'm having problems using a slow timebase. When I select something like 1/sec div timebase I get a big delay on the screen before the data is displayed and it shows it all at once. Is there anyway to change the settings so I can watch the data working its way from the left to the right hand of the screen.

thanks
steve

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: streaming mode

Post by ziko »

Hi Steve,

The 3204 is one of our earlier products that does not support fast streaming, so when it streams it streams at approximately 1kS/s. So we decided to keep the device permenantly in block mode as you will achieve higher sample rates, as such it has to capture to the memory of the device and then transfer it to the PC.

Kind regards

Ziko
Ziko

Technical Specialist

stevecn

Re: streaming mode

Post by stevecn »

Ah I see, thanks for the reply

steve

p.s I'm sorry I'm unable to reply to your pm as it says not I'm authorised to sent pms

Post Reply