triggering from a filtered signal

[Gustav]

I want to low pass filter a signal in PicoScope6 and then trigger from the signal. Low pass filtering works great and the signal looks good on the screen, but the trigger is activated from the raw signal.

I think, the obvious thing would be to trigger from the filtered signal and not the unfiltered. The point of filtering the signal in the first place is to be able to use it as reliable trigger signal.

[PeterF]

Hi,
I am afraid that triggering from a filtered signal is at present not possible. It would be a major change to PicoScope6.
Regards,
PeterF.