Reading ADC11/22 .psd files

Post any questions you may have about our current range of USB data loggers
Post Reply
Chris Ferris

Reading ADC11/22 .psd files

Post by Chris Ferris »

I have been sent some .psd files from a project that was active in 2001. I do not have any Picoscope hardware of software but would like to extract the data somehow, weither into a .csv file or into an excel spreadsheet.

Does anyone know if this can be done without software, or if the demo software suite can so this?

Many thanks

chris.ferris 'at' team-consulting.com

Lee
User
User
Posts: 5
Joined: Fri Feb 19, 2010 10:36 am
Location: Suffolk, UK

Re: Reading ADC11/22 .psd files

Post by Lee »

Hi Chris

Thanks for your post.

In regards to the software you can download the software directly from our website:-

http://www.picotech.com/software.html

You will then need to select the options as shown below. Once you open the PicoScope Software you can then open the files individually and save the files as (*.TXT) files which you can then open in Excel and then Save as an Excel File.

I hope this helps to answer your question and if you have any further questions and queries then please dont hesitate to get back in touch :D

Regards

Lee - Technical Specialist.
Attachments
ADC 11-12 Software Page.png

Post Reply